Introducing the LiDock Stop Marker for Festool guide rails.
Simply set the LiDock Stop Marker to your required position using the existing markings on your Festool saw.
Make your cut — and that position is now marked on your guide rail.
Do the same at the rear of the rail, and you’ve created a repeatable cutting setup.
Now, when you need that cut again, there’s no need to measure it all over again.
Bring your saw back to the markers, position it, and cut.
Need to make the same cut on the next panel?
Same position. Same setup. Same result.
Less measuring. Less marking. Less time wasted.
Perfect for cabinetmaking, shelving, panels and production work where repeatability matters.
Mark your position once.
Stop searching for your screwdriver. Dock it where you need it.
The LiDOCK CENTROTEC Screwdriver Holder gives your screwdriver a dedicated storage position, keeping it secure, visible and easy to grab when you need it.
Designed for a clean and organised tool setup, it's ideal for cabinetmakers, joiners, builders and tradespeople who want their most-used tools stored neatly and within easy reach.
Keep your Festool 18 Volt spare battery securely stored, organised and ready to use with the LiDOCK CXS Spare Battery Holder. A compact storage solution for workshops, tool vans and mobile tool setups.
LiDOCK products are independent third-party accessories and are not manufactured, endorsed or supplied by Festool. Festool and CXS are trademarks of Festool GmbH.
Keep your Festool CXS chuck securely stored, organised and ready to use with the LiDOCK CXS Angle Chuck Holder. A compact storage solution for workshops, tool vans and mobile tool setups.
Please note: LiDOCK products are independent third-party accessories and are not manufactured, endorsed or supplied by Festool.
Turn wasted space into organised storage with the LiDOCK Battery Dock and Base Dock. Instead of loose batteries taking up valuable room in the bottom of your Systainer, LiDOCK stores them securely in the lid, making them easier to see, easier to access, and better protected during transport.
Only for use with battery docking
Turn wasted space into organised storage with the LiDOCK Battery Dock and Base Dock. Instead of loose batteries taking up valuable room in the bottom of your Systainer, LiDOCK stores them securely in the lid, making them easier to see, easier to access, and better protected during transport.
Lid Docking with more friction for pegs, only use with battery holders
Your Drill Chuck. Docked. Ready to Go.
Stop searching for your drill chuck. Dock it where you need it.
The LiDOCK Drill Chuck Holder gives your drill chuck a dedicated storage position, keeping it secure, visible and easy to access when you need it.
Designed for a clean and organised tool setup, it's ideal for cabinetmakers, joiners, builders and tradespeople who want their accessories stored alongside their tools.
Your Drill Chuck. Docked. Ready to Go.
Stop searching for your drill chuck. Dock it where you need it.
The LiDOCK Drill Chuck Holder gives your drill chuck a dedicated storage position, keeping it secure, visible and easy to access when you need it.
Designed for a clean and organised tool setup, it's ideal for cabinetmakers, joiners, builders and tradespeople who want their accessories stored alongside their tools.
The LiDOCK CENTROTEC Bit Holder gives you a simple and organised way to store your most-used CENTROTEC bits, keeping them secure, visible and ready to grab.
Perfect for cabinetmakers, joiners, builders and tradespeople who want their tools and accessories organised without wasting valuable workspace.
Please note: LiDOCK products are independent third-party accessories and are not manufactured, endorsed or supplied by Festool. CENTROTEC is a Festool trademark.
Start with the basics. Build your perfect setup. LiDOCK is designed as a modular storage system that grows with your needs. Begin with a single lid organiser, then expand your collection with dedicated holders for your favourite tools, accessories and trades. Whether you're a cabinetmaker, electrician, plumber or carpenter, LiDOCK lets you customise your Systainer one tool at a time. It's an affordable way to improve organisation today while giving you the flexibility to add more as your toolkit evolves. Smarter storage, less clutter, and a system built around the way you work. Not forgetting jigs you can use Hinge, Shelf pins,Dog holes
The LiDOCK HEX Bit Holder gives you a simple and organised way to store your most-used hex bits, keeping them secure, visible and ready to grab.
Perfect for cabinetmakers, joiners, builders and tradespeople who want their tools and accessories organised without wasting valuable workspace. Holds 8
Please note: LiDOCK products are independent third-party accessories and are not manufactured, endorsed or supplied by Festool. Festool and Energy Set are trademarks of Festool GmbH.
The LiDOCK HEX Bit Holder gives you a simple and organised way to store your most-used Hex bits, keeping them secure, visible and ready to grab.
Perfect for cabinetmakers, joiners, builders and tradespeople who want their tools and accessories organised without wasting valuable workspace. Holds 4 twin pack
Turn wasted space into organised storage with the LiDOCK Battery Dock and Base Dock. Instead of loose batteries taking up valuable room in the bottom of your Systainer, LiDOCK stores them securely in the lid, making them easier to see, easier to access, and better protected during transport.
Please ask for left or right
Keep your Festool Energy Set organised and securely separated with the LiDOCK Energy Set Divider. Designed to create a dedicated storage solution for your batteries and charger within your LiDOCK system. Can now carry 4 Batteries in lid and 4 in box or have your CXS charger in it
Stop searching for your screwdriver. Dock it where you need it.
The LiDOCK CENTROTEC Screwdriver Holder gives your screwdriver a dedicated storage position, keeping it secure, visible and easy to grab when you need it.
Designed for a clean and organised tool setup, it's ideal for cabinetmakers, joiners, builders and tradespeople who want their most-used tools stored neatly and within easy reach.
Stop searching for your drill chuck. Dock it where you need it.
The LiDOCK Drill Chuck Holder gives your drill chuck a dedicated storage position, keeping it secure, visible and easy to access when you need it.
Designed for a clean and organised tool setup, it's ideal for cabinetmakers, joiners, builders and tradespeople who want their accessories stored alongside their tools.
Stop searching for your drill chuck. Dock it where you need it.
The LiDOCK Drill Double Chuck Holder gives your drill chuck a dedicated storage position, keeping it secure, visible and easy to access when you need it.
Designed for a clean and organised tool setup, it's ideal for cabinetmakers, joiners, builders and tradespeople who want their accessories stored alongside their tools.
Your Drill Chuck. Docked. Ready to Go.
Stop searching for your drill chuck. Dock it where you need it.
The LiDOCK Drill Chuck Holder gives your drill chuck a dedicated storage position, keeping it secure, visible and easy to access when you need it.
Designed for a clean and organised tool setup, it's ideal for cabinetmakers, joiners, builders and tradespeople who want their accessories stored alongside their tools.
Keep screws, fixings, fasteners and small tools organised with this practical little storage boxe designed for Festool users, workshops and Systainer-based tool storage.
Please note: LiDOCK products are independent third-party accessories and are not manufactured, endorsed or supplied by Festool. Festool and CXS are trademarks of Festool GmbH.
eep your Festool CXS spare battery securely stored, organised and ready to use with the LiDOCK CXS Spare Battery Holder. A compact storage solution for workshops, tool vans and mobile tool setups.
LiDOCK products are independent third-party accessories and are not manufactured, endorsed or supplied by Festool. Festool and CXS are trademarks of Festool GmbH.
Keep your Festool CXS angle chuck securely stored, organised and ready to use with the LiDOCK CXS Angle Chuck Holder. A compact storage solution for workshops, tool vans and mobile tool setups.
Please note: LiDOCK products are independent third-party accessories and are not manufactured, endorsed or supplied by Festool.
Stop searching for bits. Dock them where you need them. Twin Pack
CENTROTEC bit holder, CENTROTEC bit storage, Festool CENTROTEC holder, Festool bit holder, Festool bit storage, CENTROTEC accessories, screwdriver bit holder, drill bit holder, tool bit organiser, Festool accessories, LiDOCK, LiDock storage, modular tool storage, workshop organiser, Systainer storage, cabinetmaker tools, joinery tools, tool van storage, 3D printed tool holder, NZ made, New Zealand 3D printing
Please note: LiDOCK products are independent third-party accessories and are not manufactured, endorsed or supplied by Festool. CENTROTEC is a Festool trademark.
The LiDOCK HEX Bit Holder gives you a simple and organised way to store your most-used HEX bits, keeping them secure, visible and ready to grab.
Perfect for cabinetmakers, joiners, builders and tradespeople who want their tools and accessories organised without wasting valuable workspace. Holds 10
The LiDOCK CENTROTEC Bit Holder gives you a simple and organised way to store your most-used CENTROTEC bits, keeping them secure, visible and ready to grab.
Perfect for cabinetmakers, joiners, builders and tradespeople who want their tools and accessories organised without wasting valuable workspace.
Please note: LiDOCK products are independent third-party accessories and are not manufactured, endorsed or supplied by Festool. CENTROTEC is a Festool trademark.
This purpose-designed Base Dock for Festool screw boxes allows your screw storage box to sit securely in the Base Dock system, giving you a neat and organised way to store screws, fixings and small hardware.
Ideal for cabinetmakers, joiners, builders and tradespeople who want a more organised workshop or mobile tool setup.
Clips on top of your Base Dock box right only
Keep your screws, fixings and small parts organised and easy to find.
These practical storage and screw boxes are designed for tradespeople, cabinetmakers, joiners, workshops and DIY users who want a better way to organise small parts and accessories.
Ideal for keeping screws, nails, wall plugs, fittings, drill bits and other small workshop items together and easily accessible.
Add Festool chuck holders
Keep your screws, fixings and small parts organised and easy to find.
These practical storage and screw boxes are designed for tradespeople, cabinetmakers, joiners, workshops and DIY users who want a better way to organise small parts and accessories.
Ideal for keeping screws, nails, wall plugs, fittings, drill bits and other small workshop items together and easily accessible.
Festool Battery Charger Holder – Single Charger Storage | Workshop & Systainer Organisation
Keep your Festool battery charger neatly stored and easy to access with this purpose-designed single charger holder. Ideal for workshops, tool storage, Systainer setups and mobile workspaces.
Turn wasted space into organised storage with the LiDOCK Battery Dock and Base Dock. Instead of loose batteries taking up valuable room in the bottom of your Systainer, LiDOCK stores them securely in the lid, making them easier to see, easier to access, and better protected during transport.
Please ask for left or right
Systainer 3 Lidock
Start with the basics. Build your perfect setup. LiDOCK is designed as a modular storage system that grows with your needs. Begin with a single lid organiser, then expand your collection with dedicated holders for your favourite tools, accessories and trades. Whether you're a cabinetmaker, electrician, plumber or carpenter, LiDOCK lets you customise your Systainer one tool at a time. It's an affordable way to improve organisation today while giving you the flexibility to add more as your toolkit evolves. Smarter storage, less clutter, and a system built around the way you work. Not forgetting jigs you can use Hinge, Shelf pins,Dog holes
Second Generation Systainer options
Option 1 Lidock plate
Start with the basics. Build your perfect setup. LiDOCK is designed as a modular storage system that grows with your needs. Begin with a single lid organiser, then expand your collection with dedicated holders for your favourite tools, accessories and trades. Whether you're a cabinetmaker, electrician, plumber or carpenter, LiDOCK lets you customise your Systainer one tool at a time. It's an affordable way to improve organisation today while giving you the flexibility to add more as your toolkit evolves. Smarter storage, less clutter, and a system built around the way you work.
No results match your search. Try removing a few filters.
